PARAMEDIC SERIES AED MANUAL / SEMI AUTOMATED EXTERNAL DEFIBRILLATOR CU-ER3

FEATURES:

  • Manual Mode – 12 steps escalating
  • AED Mode – 150J into a 50Ω load.
  • Automatic analysis of patient ECG
  • User guide with text and voice prompts.
  • 320 X 240 graphic LCD display.
  • Versatile Power Supply, rechargeable battery pack and AC adapter standard.
  • Battery has capacity of 200 shocks when fully charged.
  • Car cigar lighter jack power cord and disposable battery pack optional.
  • Rescue data collected is stored in internal flash memory.
  • Rescue data can be downloaded for review, archiving and printing.
  • Automatic self tests, prompts and alarms given if device fails self tests.

 

Category:

Description

MODEL CU-ER3

ECG Monitor

– Patient connection: Defibrillation Pads, ECG Electrodes.

– Bandwidth: Monitoring Mode: 0.3 to 40Hz (-3dB)

                     EMS Mode – 1~30Hz

– ECG size: 5,10, 20mm/mV display on monitor

             ( Auto scaling)

– Heart rate: Digital 30 to 300 bpm (±2%)

 

Defibrillator

– Operation mode: Manual/Semi automatic

– Waveform: e-cube biphasic (BTE type)

– Energy:  – Manual mode: Variable energy levels selection

                   (12 steps escalating)

                   (2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200)J

          – AED mode: 150J into a 50Ω load

– Synchronous Cardio version: Energy deliver begins within 60ms of the QRS peak

– Charging time: Less than 10 seconds

– Controls: – Manual mode: CHARGE, SYNC (R-wave), DISARM

                  – AED mode: ANALYZE, PAUSE

– Detection Level: > 0.1mV ECG

– Defibrillation Electrodes: Multifunction electrodes (Disposable)

                                    Adult adhesive pads (pre-gelled)

Voice and Text Prompts

– Voice and text prompts guide the user through the protocol

– All the user interfaces are supported in local language for easy use.

Data Storage & Management

– Internal flash memory: 12 hours of event and ECG recording

– SmartMedia Card (32M): 42 hours of event and ECG recording or 1 hour if voice recording is enabled.

– Multi patient data recording

– Review the patient’s ECG, Incident details and the device information

– Transmit multi patient data to PC

Automated Self-Test

– Power On Self-Test / Run Time Self-Test / Manual Test

– Periodic Self-Tests (daily / weekly / monthly)

Display

– Screen Type: High resolution display (graphic LCD)

– Screen size: 4 inches diagonal, 320×240 pixels

– Sweep speed: 25mm/sec, nominal

– Viewing time: 3.2 seconds

Physical

– Size: 254mm x 309mm x 93mm (L x W x H)

– Weight: Approximately 2.8Kg

– Patient Isolation: Type BF

AC Adaptor

– Input: 100 ~ 240V AC 50/60Hz 170VA

– Output: + 12VDC, 3.6A

Battery Pack

– 12V Nickel-Metal Hydride battery pack (rechargeable)

– Charging time: Minimum of 4 hours for full charging

– Capacity: when new, minimum of 200 shocks deliveries (fully charged)

External Link

– UART port

– IrDA port

Package Contents

Device, 1 Sets of pads, 1 Power Cord, 1 AC Adapter, 1 Long Life NI-MH battery, 1 Operator’s Manual, 1 Quick Reference Card, SPO2 Probe

Optional Accessories

Carrying Case

– Car Cigar Lighter Jack Power Cord

– SmartMedia Card (32M)

– External Thermal Printer (wire) and paper

– UART Cable / ECG Cable (3 lead) / ECG Electrodes.

– Data management software(CU-EX1) for multi patient

– Lithium Battery (disposable)

– Pediatric pads

Your Shopping cart

Close